I walk to Advanced->Network and also it mirrors me one IP address. I cannot reach the IP deal with globally. If I shot reaching the locally, it provides me a `Rejected request from RFC1918 IP to public server address` error.

You are watching: Rejected request from rfc1918 ip to public server address

I deserve to port forward, and also then walk to that IP resolve at the port works... Locally. It does not work-related globally.

My ISP does no install a modem. The IP attend to starts with 100, therefore I"m rather sure it"s a windy one, yet it cannot be accessed publicly. That doesn"t work and also I"m nearly done with trying. I simply don"t know...


0
reply
0
#1
OptionsSubscribeBookmarkReport unreasonable Content
7 Reply
Posts: 6317
Kudos: 625
Solutions: 155
Stories: 46

*
Tony
Posts: 6317
Kudos: 625
Solutions: 155
Stories: 46
Re:Accessing the WAN IP stops working to work
Connor77

When you allow remote management you must take keep in mind of the port that is shown.

Take this for example:

My web management port is 90. So say mine public IP is 1.1.1.1 then as soon as I open my web browser. I will put:

1.1.1.1:90

The end part (bolded) is what is important. If you just put 1.1.1.1 climate the web browser will shot to access the IP on harbor 80 i beg your pardon is incorrect.

One other essential note is that if you want to accessibility the router via the general public IP you can not it is in on the same neighborhood network of the Archer C1200. If you currently are on the C1200 Wi-Fi, then usage the inner IP deal with (192.168.x.x).


0
reply
0
#2
OptionsReport inappropriate Content
Posts: 4
Kudos: 0
Solutions: 0
Stories: 0

Connor77
LV1
Posts: 4
Kudos: 0
Solutions: 0
Stories: 0
Re:Accessing the WAN IP fails to work
Tony Hey, thanks for the answer! ns did what you said, but unfortunately, also that walk not solve the problem.

Right now, ns think the difficulty is that router"s IP is just not externally visible. Together I said, harbor forwarding works yet is not reachable external of my LAN.

And that"s what"s obtained me so confused! I recognize as a fact that my ISP does not install a modem, and I collection the network mode to work-related accordingly, but the router is simply not publicly accessible!


0
answer
0
#3
OptionsReport inappropriate Content
Posts: 6317
Kudos: 625
Solutions: 155
Stories: 46

*
Tony
Posts: 6317
Kudos: 625
Solutions: 155
Stories: 46
Re:Accessing the WAN IP stops working to work
Connor77

Change the internet management port to a various value, ns would shot 9000.

Maybe the ISP doesn"t prefer ports much less then 1024.

If her WAN IP is not something like 192.168.x.x then prefer you mentioned that is her public IP. Can be worth contacting lock to check out if any filtering is done to the IP given.


0
reply
0
#4
OptionsReport inappropriate Content
Posts: 4
Kudos: 0
Solutions: 0
Stories: 0

Connor77
LV1
Posts: 4
Kudos: 0
Solutions: 0
Stories: 0
Re:Accessing the WAN IP fails to work
Tony No dice. Connection times out.


0
reply
0
#5
OptionsReport inappropriate Content
Posts: 6317
Kudos: 625
Solutions: 155
Stories: 46

*
Tony
Posts: 6317
Kudos: 625
Solutions: 155
Stories: 46
Re:Accessing the WAN IP fails to work
Connor77

Please contact one of ours techs:https://www.doyourpartparks.org.com/us/support/contact-technical-support/#Hotline-Support

In the median time there room public harbor scanners you deserve to use to shot different port numbers to check out if any type of show up as open when the port is conserved in the router.


0
reply
0
#6
OptionsReport unreasonable Content
Posts: 3
Kudos: 1
Solutions: 0
Stories: 0
kzaoaai
LV1
Posts: 3
Kudos: 1
Solutions: 0
Stories: 0
Re:Accessing the WAN IP falls short to work
Connor77Did you ever figure this one out?? I"m having the same issue.

See more: Watch The Dark Tower Online Free 123Movies, Watch The Dark Tower Full Movie Online


0
reply
0
#7
OptionsReport inappropriate Content
Posts: 4
Kudos: 0
Solutions: 0
Stories: 0
Connor77
LV1
Posts: 4
Kudos: 0
Solutions: 0
Stories: 0
Re:Accessing the WAN IP stops working to work
Connor77

Yes. One IP address beginning with 100 is thought about a "private" IP resolve by a specific namespace. I"m not sure of all the criter for IP meanings, yet I recognize 100 is a digital address. Because that me, it to be my ISP. If her public ip resolve on her router starts with 100, that"s in reality a digital IP deal with assigned by your ISP to limit the number of public IP addresses out there. I referred to as them and they offered me a public IP deal with before the call ended.


0
answer
0
#8
OptionsReport inappropriate Content
reply
Posts: 4
Kudos: 0
Solutions: 0
Stories: 0
Connor77
LV1
Posts: 4
Kudos: 0
Solutions: 0
Stories: 0
Related short articles
Public IP not the exact same as WAN IP on 3G/4G Router
1758 0
Router accessibility via WAN Rejected request from RFC1918 IP come public server address
365 0
Configure to work in the same variety as my ISP router
62 0
TL-WR902AC stops working to affix to the Internet
1015 0
Accessing server via windy IP yields error message
2452 0
TPLink C4000 looses connectivity come WAN, fails to gain a WAN DHCP assigned address
96 1
CancelReport unreasonable ContentNotify Moderator
CancelNotify Moderator
CancelTransfer ModuleOK
CancelOK
New message
CancelSend
About UsPress
Follow Us