You are watching: Harbor freight 1/4 torque wrench
Found this deal on one more website. I have actually seen this torque wrench recommended as a cheap alternative on this website several times so thought I would short article it. Here"s the link.3/8" and 1/2" are likewise priced at $9.99 with coupon. Shipping is $6.99 if friend don"t have a B&M by her house. There is likewise a coupon password for a totally free 25" measuring tape with purchase.
Busy monster eats dark feet in the heart worldWhere wild things have to go come disappearForever... - B.C.
This is what it offers in the description: The click-stop torque wrench style provides a torque variety from 20 to 200 in. Lbs. And also is specific to in ~ +/- 4% .
I have actually one the these for the tighter bolts and likewise a Park tool TW-1 for all else. They are very close if no the same as much as torque measurements/settings. I expect for the price ns can"t complain. I"m certain its much more accurate than nothing, at the very least for me. I provide my recommendation, however I guess i feel better because I have actually the Park device for comparison, fwiw.
I bought one of those a couple of years ago for irradiate to moderate usage on the bike. After a couple years, the click disappeared. Also, the click at reduced settings was an overwhelming to detect. You gain what you salary for.
I bought among those a few years back for light to moderate use on the bike. After a couple years, the click disappeared. Also, the click at reduced settings was difficult to detect. You acquire what you salary for.
Good point around quality in the long run, but looks favor it has a lifetime warranty, assuming that wasn"t abused. Possibly there"s a grey area together it says constraints apply.From the product page:Manufacturer Warranty information Lifetime Warranty. Us guarantee this device to be totally free from defects in material and workmanship for the life that the product. Limitations apply.
Good DealEach complete turn the handle shows up to adjust 20in/lb rather of 30 choose it"s marked, but if friend don"t have actually a in/lb speak wrench friend can"t walk wrong because that $10.
Thanks to all, together you have the right to see I know nothing about these. So, perform you counting clicks to gain to the desired number?
There"s a collar you turn at the height of the handle with numbers/lines for torque. Collection your torque value, tighten the bolt/screw and when you get to the desired torque, the wrench will certainly click, telling you to avoid tightening it.
Each full turn of handle appears to change 20in/lb rather of 30 like it"s marked, however if you don"t have actually a in/lb torque wrench girlfriend can"t walk wrong because that $10.
Until the doesn"t click and you strip the bolt or snap the bolt head off. Than you kick you yourself in the a$$ because that buying junk tools.
Until that doesn"t click and you strip the bolt or snap the bolt head off. 보다 you kick yourself in the a$$ because that buying junk tools.
Well that doesn"t sound good; I"m pretty certain my "by feel" technique won"t cause that. What would you recommend as a ceiling minimum?
Well that doesn"t sound good; I"m pretty sure my "by feel" technique won"t cause that. What would certainly you recommend together a ceiling minimum?
Personally, i would gain a an excellent old fashion beam style torque wrench... Preferrably a USA make one. Ns think the variety on this one is a little high and also clicker type torque wrenches deserve to be a small finicky in ~ the end of their range (especially cheap ones). If friend don"t desire to drop $35+ dollars ~ above one climate I would certainly recommend at least this.
I would certainly say happen on it. Mine price me a stem bolt and almost a weekend ride. I don"t feeling mine is also close come accurate. Obtain what you pay for ns guess.
Thanks, ns think I"ll spend actual money and also get a real tool that"ll last. I can be old fashioned, however was increased to purchase American once it pertains to tools.
See more: I5-8600K Vs I5-9600K - I5 8600K Vs I5 9600K: Pcmasterrace
I would certainly pass ~ above that. Once I to be younger and really into cars and also racing. I had a 1/2" journey harbor freight talk wrench. The clicker failed and also I snap a stud turn off the wheel hub. Bad component is the it to be the behind wheel, and also to replace the stud you had to take the rear hub off on a rx7. Which expected you had to also replace the wheel bearing i m sorry is a large PITA.I tossed that torque wrench right into the garbage immediately.crap tools = damaged parts. If you room going to begin wrenching on her own, get some actual tools.Even the park tools torque wrenches (new clicker ones) are no good. Doesn"t come v a calibration certificate. Walk to amazon.com and also look for SK or mac torque wrenches. Cheaper 보다 park tools and also better.
A forum community committed to mountain Bike owners and enthusiasts. Come join the discussion about bike parts, components, deals, performance, modifications, classifieds, trails, troubleshooting, maintenance, and also more!